Guides

Short-term vs. long-term radon tests

Last checked November 19, 2026

What short-term and long-term radon tests measure, which one EPA recommends when you are buying a house, and the three short-term options for a real estate closing.

Radon levels in a house tend to vary from day to day and from season to season. That is why the length of a test matters. EPA's Home Buyer's and Seller's Guide to Radon (March 2024) describes two general ways to test: a short-term test and a long-term test.[1] CDC uses the same split: short-term kits measure radon for 2 to 90 days; long-term kits measure for more than 90 days and are meant to show a year-round average. CDC adds that the longer the test, the better the results will reflect the home's radon levels and your lifestyle.[2]

Short-term tests

EPA says a short-term test remains in your home for 2 to 90 days, depending on the device. Short-term tests can be used to decide whether to fix the home when you need results quickly, but they are less likely than a long-term test to tell you the year-round average.[1] CDC describes short-term kits the same way: 2 to 90 days, for quick results.[2]

Common short-term devices include charcoal canisters, charcoal liquid scintillation devices, electret ion chambers, and continuous radon monitors. Passive devices do not need power; active devices, including continuous monitors, do, and they can record changes during the test.[1]

Long-term tests

EPA says long-term tests remain in the home for more than 90 days. Alpha-track and electret ion chamber detectors are commonly used. A long-term result is more likely to tell you the year-round average. If time permits (more than 90 days), EPA says a long-term test can be used to confirm an initial short-term result. When a long-term result is 4 pCi/L or higher, EPA recommends fixing the home.[1]

CDC likewise says long-term kits measure radon for over 90 days and tell you the home's year-round average level.[2]

A long-term test is a poor fit for most purchase contracts, which do not leave 90 days for a measurement. It is a better tool after you move in, or when a short-term result is close to 4 pCi/L and you have time to confirm it. Pennsylvania's radon program, for example, says that if a result is 4 to 8 pCi/L, you can do a second long-term (365-day) test to get a better idea of the annual average, or another short-term test of 2 to 7 days; in either case, if the result is still 4 pCi/L or higher, you should reduce the levels.[3]

Which one to use when you are buying

EPA wrote a slightly different protocol for home purchases and sales than it uses for ordinary, non-real-estate testing, because closings are time-sensitive and because there is a potential for test-device interference.[1] For real estate, the buyer's guide says any of the following three short-term options is acceptable in determining whether the home should be fixed, and that any real estate test should include steps to prevent or detect interference:[1]

EPA notes the trade-offs: two tests taken at the same time improve precision; one test followed by another is more likely to represent a seasonal average. Both active and passive devices may have features that help prevent interference. Your state radon office can help you decide which option is best.[1]

CDC's follow-up advice for a short-term result above 4 pCi/L is consistent with that idea: take a second test, either short-term or long-term; if you use a second short-term test, average the two results; then contact a licensed professional to install a reduction system if that average, or any long-term test, is at or above 4 pCi/L.[2]

Conditions that make a short-term test reliable

When you take a short-term test, EPA says to close windows and doors to the outside and keep them closed, except for normal entry and exit. If the short-term test lasts less than four days:[1]

CDC's placement language is a little different: it says to place the device in the basement or lowest level, raised three feet off the ground, in the middle of the room.[2] Official sources do not all use the same height. Colorado's radon program tells DIY testers to place the kit on a surface 2 to 7 feet above the floor.[4] Follow the instructions that come with your device, and if a qualified tester is doing the work, ask them to follow the protocol required in that state.

See also radon testing when buying a house and DIY kit vs. a professional radon test.

Sources

Every page below was fetched on November 19, 2026. If an official page has since changed, the official page wins.

  1. EPA, Home Buyer's and Seller's Guide to Radon (EPA 402/K-24/001, March 2024, revised) — PDF fetched November 19, 2026.
  2. CDC, Testing Your Home for Radon — Page states updated and reviewed August 26, 2026. Opened November 19, 2026 (the box curl was blocked with HTTP 403; the page was read through a fetch tool the same day).
  3. Pennsylvania Department of Environmental Protection, Radon in the Home
  4. Colorado Department of Public Health and Environment, Testing and mitigating your home for radon — Opened November 19, 2026.

This page is a reading of official and reputable published pages, not legal, lending, medical, or engineering advice. Radon rules are set by states and sometimes by localities, and they change. Confirm anything that affects a sale or a loan with your state radon office, your lender, and your closing attorney or agent.